—— Products Center ——
Products
Quick Fact
If you have any comments or suggestions, please click the button below to find the message board and leave a message for us
Short Lead Time for Road Marking Paint In South Africa - Normal Temperature Road Marking Paint – Luxinda
Update time:Jan-08-2016
3 Levels of Thermo to ft your budget
Cold Solvent Road Marking Paint is environment friendly product,it consists of Modified Acrylic resin, colored aggregate, filler material and etc. it is suitable for application to bituminous and concrete roads. It can be successfully applied to airless or air auxiliary spraying equipment.
test item | technical requirements | testing result | |||||
estimated value | Single conclusion | ||||||
1 | condition in container | noagglomeration,crusting,easy to mix up | Qualified | PASS | |||
2 | viscosity | ≥100 | 121 | PASS | |||
3 | density(g/m³) | ≥1.2 | 1.45 | PASS | |||
4 | workability | Good workability | Qualified | PASS | |||
5 | film appearance |
Nowrinkle,spot,blister,crack,off,Glued tyres ,the colour of fill appearance should be closed to standard |
Qualified | PASS | |||
6 | drying time(Min) | ≤15 | 9 | PASS | |||
7 | hiding rare(%) | white | ≥95 | 98 | PASS | ||
yellow | ≥80 | / | PASS | ||||
8 | colorimetric characteristics | white | luminance factor | ≥0.75 | 0.97 | PASS | |
yellow | luminance factor | ≥0.45 | / | PASS | |||
9 | abrasive resistance(mg) | ≤40(JM-100 rubber emery wheel) | 22.4 | PASS | |||
10 | Water tolerance | There's no abnormal phenomena 24 hours after being Soaked in the water | Qualified | PASS | |||
11 | alkali resistance |
There’s no abnormal phenomena 24 hours after being Soaked in the Saturated calcium chloride solution |
Qualified | PASS | |||
12 | adhesiveness | ≤4 class | 2 class | PASS | |||
13 | flexibility(mm) | ≤5 | 1 | PASS | |||
14 | solid content(%) | ≥60 | 68.6 | PASS |
BAISC INFORMATION | |
Product Name | Normal Temperature Road Marking Paint |
Use For | Concrete and asphalt floor |
Components | Titanium dioxide, natural calcium carbonate, filler materials… |
Appearance | Solvent |
Standard | JT/T280-2004 |
Color | White, Yellow, Red, Blue, Green, Black |
Weight | 25kg/barrel, 15kg/barrel, 5kg/barrel |
Density | 45g/ cm³ |
Film Thickness | 700μm |
PHYSICAL CHARACTERISTICS | |
Abrasion Resistance | 22.4mg |
Solid content | 68.6% |
Viscosity | 121 KU |
Flexibility | 1mm |
Luminance factor | 0.85 |
Drying Time After Marking | 9 mins |
Shelf Life | Up to 24 months |
Storage | Store in a tightly sealed container in a cool & dry place |
FEATURES |
High usage ratio |
It's an environmental paint |
Tough and wear-resistant |
Fast drying under a wide range of climatic conditions |
Not faded easily marking line |
Easy to be applied with different equipment |
Various of color to be choose |
Previous page:
Related Suggestion
China New Product Machine Road Marking - LXD Boost Vehicle (ride-on system) – Luxinda
China New Product Machine Road Marking - LXD B...
Factory Outlets Line Marking Wellington - LXD168 Driving Type Multi-functional Thermoplastic(convex) Road Marking Machine – Luxinda
Factory Outlets Line Marking Wellington - LXD1...
China Factory for Paint For Road Marking - Thermoplastic Road Making Paint – Luxinda
China Factory for Paint For Road Marking - The...
Massive Selection for Traffic Marking Machine - LXD-II High Pressure Road Surface Blowing Machine – Luxinda
Massive Selection for Traffic Marking Machine -...
Top Quality Football Pitch Line Marker - LXD-618 Driving Type Thermoplastic(convex) Road Marking Machine – Luxinda
Top Quality Football Pitch Line Marker - LXD-6...
Hot Selling for Thermoplastic Applicator - LXD Two-component Road Marking Machine – Luxinda
Hot Selling for Thermoplastic Applicator - LXD...