Abstract: The marking width of a manual marking machine is determined by the width of the hopper, commonly used as 100mm, 150mm, and 200mm. Hot melt coatings require heating to between 180-230 degrees Celsius before application   The methods of marking construction can be roughly divided int...

Two-component road marking machine: two-component marking line is a kind of high-end marking emerging in recent years, which is different from hot-melt marking line and normal temperature marking line, that are formed by physical drying methods such as temperature drop or solvent (water-based) vo...

If the quantity of marking work is not large, such as redrawing the old line in some sections, the hot-melt road marking machine can be used for ordinary pushing or holding test. Because the small hot road marking machine is small in size, flexible in construction and convenient in transportation...

LXD-9L is a fast manual road marking equipment used in the construction of Jiangsu LuXinda cold spraying marking machine, which is suitable for construction in various harsh environments. In particular, the powerful hydraulic system guarantees the cold spraying construction.

Jiangsu Luxinda Traffic Facilities Co., Ltd. is a scientific and technological enterprise which is engaged in the professional road marking machine research and development, design, production, and sales. It is located at the foot of Runyang Yangtze River Highway Bridge, Road, railway, and boat i...

Abstract: The line width of the hand-push type marking machine is determined by the width of the hopper, which is usually 100mm, 150mm, 200mm. Hot melt coatings need to be heated to between 180-230 degrees Celsius to apply. The method of marking construction can be roughly divided into manual m...

At present, when the marking of high-pressure water blasting machineis cleared, because some operations also have higher and higher environmental protection requirements, the high-pressure water jet marking removal method has emerged at the historic moment, and has become a type of marking that ...

Double-group road marking machine: Two-component marking is a high-end marking developed in recent years. It is different from hot-melt marking and normal-temperature marking due to temperature drop or solvent (water-based) volatilization and other physical drying methods to form a coating film....

Product features of the marking machine: The high-efficiency and large-flow S7000 can directly connect two guns to work at the same time, which greatly improves the work efficiency and supports the use of large-size nozzles. Powerful: The flow rate of 5.8 l/min makes SF7000 deservedly become th...