Specification of this Road Marking Remover Manufacturer   Engine 11.0HP(hand starting air-cooled four stroke gasoline engine) Working width 180mm Working thickness adjusted according to the situation of road surface,normally less than 3mm Work efficiency 600-800m²per day working life of Grinding head 20,000m-30,000m Driving Method Self propelled Strength strong, middle or weak(adjusted) Weight 162kg Size 1200×650×980mm   Pictures of this China Road Marking Remove...

Specification of this Micro Glass Beads Manufacturer Introduction Glass Beads are tiny spheres of glass that used in road marking paint and durable road markings to reflect  light back to the driver in darkness or poor weather conditions – improving safety and visibility.  The glass beads ...

Specification of this High Pressure Airless Cold Paint Spray Road Marking Machine Manufacturer   Specification It is special equipment to normal temperature paint construction. It is suitable for roads, highway, parking lot,airport, station.it can mark a straight line, dotted line, curve, zebra crossing, arrows, etc. It is the spray equipment with high pressure,equal discharge and airless. It use gasoline engine to drive single plunger pump to work, which can generate high pressure ...

Specification of this Sitting Driving Type Cold Plastic Road Marking Machines Manufacturer Engine :Kubota V1505, 30 HP (22 kW) Fuel :diesel, capacity 34 liter Electrical system :12 V, battery 66 Ah Steering :strong standard mechanical steering Drive / brake system :hydrostatic drive, also acting as service brake, parking brake hydraulically controlled multi disc brake Wheels :front: 6.00-9 12PR, 5 hole-rim / rear: 6.00-9 12PR, 5 hole-rim Compressor :2-cylinder Boge compressor Typ SK 26, e...

Specification of this Thermoplastic Vibrating Line Marking Paint Manufacturer Vibrating thermoplastic road marking paint consists of thermoplastic resin, modified rubber, fillers, and special materials and other substances. It is developed on the basis of pursuing high visibility and vibration. It is widely applied to the centre lines of roads (overtaking-prohibited lines), edge lines of highway, crossing slowdown lines and so on. Rainy night reflections: excellent visibility ...

Specification of this Two-component Road Marking Machine Manufacturer   Specification It has two container for paint A and paint B, which can be mixed together by stirring device.the stirring device can stir automatically,which supported by mobile power. Line thickness 1.2-2.5mm Adjustable, Paint container capacity 50kg×2 Glass beads box capacity 15kg Curing agent box capacity 15kg Marking shoe Manual screeding type Standard configuration 375px/20/750px/1000px/1125px opt...

Specification of this Driving Type Cold Paint Spray Road Marking Machine Manufacturer   Technical data:       Line type:  cold paint       Air compressor displacement:  0.45m3/min       Glass beads dispenser: Pneumatic dispensing (working pressure adjustable)       Paint tank: 150L*2（Oval paint tank, same as the picture provided by customer）       Hydraulic agitator: each paint tank equipped with a Hydraulic agitator.       hydraulic plunger pump：Graco          hydraulic plunger pump F...

  Specification of this Hydraulic Double Cylinder Thermoplastic Preheater Manufacturer   Specification It is designed for parking lot,community and other small size road.it has advantages of working long time,easy operation,and simple maintenance etc. Engine 7.5PS electric strat water-cooled diesel engine Stirring system Hydraulic stirring system with protective device, can stir clockwise or anti-clockwise. Heating mode LPG(gas tank suggest 50KG) ,Direct injection energy-e...

Specification of this Road Marking Machine Manufacturer For Thermoplastic With Extruder Technical Data Machine Type Road marking machine LXD-E618 Engine 25 HP Fuel diesel, capacity 34 liter Electrical system 12 V, battery 66 Ah Steering strong standard mechanical steering Drive /brake system hydrostatic drive, also acting as service brake ,parking brake hydraulically controlled multi disc brake Wheels front: 6.00-9 12PR, 5 hole-rim rear: 6.00-9 12PR, 5 hole-rim Compresso...