Specification of this Road Marking Machine Manufacturer For Thermoplastic With Extruder Technical Data Machine Type Road marking machine LXD-E618 Engine 25 HP Fuel diesel, capacity 34 liter Electrical system 12 V, battery 66 Ah Steering strong standard mechanical steering Drive /brake system hydrostatic drive, also acting as service brake ,parking brake hydraulically controlled multi disc brake Wheels front: 6.00-9 12PR, 5 hole-rim rear: 6.00-9 12PR, 5 hole-rim Compresso...

Specification of this Thermoplastic Vibrating Line Marking Paint Manufacturer Vibrating thermoplastic road marking paint consists of thermoplastic resin, modified rubber, fillers, and special materials and other substances. It is developed on the basis of pursuing high visibility and vibration. It is widely applied to the centre lines of roads (overtaking-prohibited lines), edge lines of highway, crossing slowdown lines and so on. Rainy night reflections: excellent visibility ...

  Specification of this Ride On Type Thermoplastic Road Marking Machines Manufacturer     Specification Thermoplastic road marking machine is the key equipment used in thermoplastic road marking construction, it need to work together with thermoplastic preheater. The marking shoe is made of high-precision cast iron, which can make the road line orderliness,uniform thickness and more beautiful. The grounded knife of marking shoe can adapt to different kinds of road. The gla...

Specification of this Two-component Road Marking Machine Manufacturer   Specification It has two container for paint A and paint B, which can be mixed together by stirring device.the stirring device can stir automatically,which supported by mobile power. Line thickness 1.2-2.5mm Adjustable, Paint container capacity 50kg×2 Glass beads box capacity 15kg Curing agent box capacity 15kg Marking shoe Manual screeding type Standard configuration 375px/20/750px/1000px/1125px opt...

Specification of this Two Component Rib Line Road Marking Machine Manufacturer Two component rib line road marking machine Engine Honda gasoline engine，air-cooled engine Power:5.5HP Driving method  Automatic oil pressure stepless transmission Working speed 10-15m/min  Maximum Gradeability 15° Line thickness Flat line：0-3.5mm rib line： height:...

  Specification of this High Pressure Road Surface Blowing Machine Manufacturer   Specification LXD-II road surface blowing machine is an auxiliary equipment for road line marking construction, which mainly used to sweep the road surface before road marking construction. It is equipped with gasoline engine which can drive the fan to work, its powerful wind pressure can clean up impurities and dust of the road. It has the shelf to place primer barrel,which can help you complete t...

Specification of this Self-propelled Convex Line Road Marking Machine Manufacturer   Advantages: According to the international case statistical data, the traffic accidents will be reduced by more than 30% after convex mark lines are adopted , casualties and economic losses are reduced greatly. As a result experts appeal to the use of this kind of mark line as the standard line for traffic safety. Features: 1. Compulsory deceleration, reminding the driver to slow down in dangerous section ...

Specification of this Pre-marking Machines Manufacturer   specification LXD pre-marking machine is the assistant machine in road marking construction. It can mark the pre-marking freely according to the requirements of construction to avoid faulty marking. Also can accomplish 1-3 lines independently, which greatly improves the construction efficiency. Function it can make three baseline at the same time Max.width 9m Size 1300×900×1000mm Net weight 128kg Pictures of thi...

Specification of this Sitting Driving Type Cold Plastic Road Marking Machines Manufacturer Engine :Kubota V1505, 30 HP (22 kW) Fuel :diesel, capacity 34 liter Electrical system :12 V, battery 66 Ah Steering :strong standard mechanical steering Drive / brake system :hydrostatic drive, also acting as service brake, parking brake hydraulically controlled multi disc brake Wheels :front: 6.00-9 12PR, 5 hole-rim / rear: 6.00-9 12PR, 5 hole-rim Compressor :2-cylinder Boge compressor Typ SK 26, e...