Specification of this Hydraulic Double Cylinder Thermoplastic Preheater Manufacturer   Specification It is designed for parking lot,community and other small size road.it has advantages of working long time,easy operation,and simple maintenance etc. Engine 7.5PS electric strat water-cooled diesel engine Stirring system Hydraulic stirring system with protective device, can stir clockwise or anti-clockwise. Heating mode LPG(gas tank suggest 50KG) ,Direct injection energy-e...

Specification of this High Pressure Road Surface Sweeper Manufacturer Product Introduction Road marking auxiliary equipment—road surface high pressure sweeper mainly used to  clean bleeding cement,mud,capping mass and cold paint marking line.It is equipped  with strength regulator which can be adjusted according to&n...

Specification of this Thermoplastic Road Making Paint Manufacturer Test item Technical requirements Test value Conclusion Density(g/cm³） 1.8~2.3 1.99 Qualified softening point 90~125 104 Qualified drying time ≤3 3 Qualified film appearance No wrinkle,spot,blister,crack,off,Glued tyres ,the colour of fill appearance should be closed to standard Meet the requirement Quali...

  Specification of this High Pressure Road Surface Blowing Machine Manufacturer   Specification LXD-II road surface blowing machine is an auxiliary equipment for road line marking construction, which mainly used to sweep the road surface before road marking construction. It is equipped with gasoline engine which can drive the fan to work, its powerful wind pressure can clean up impurities and dust of the road. It has the shelf to place primer barrel,which can help you complete t...

Specification of this High Pressure Road Surface Sweeper Manufacturer Product Introduction Road marking auxiliary equipment—road surface high pressure sweeper mainly used to  clean bleeding cement,mud,capping mass and cold paint marking line.It is equipped  with strength regulator which can be adjusted according to&n...

Specification of this Ultrahigh Pressure Water Blasting Road Marking Removal Manufacturer With Suction System Max. Working Pressure: 2800Bar (40Kpsi); Working pressure: 2500Bar (36Kpsi) Max. Flow: 45L/MIN; Driving method: direct drive Diesel power: 255kw Diesel Brand: Cummins Host Size: 2500×1720×1585 mm Host weight：3000KG Machine weight: 7000KG Machine size:6000×2200×2300 mm  Advantage one:imported suction system LXD260B ultrahigh pressure water blasting road marking removal adopt suct...

Specification of this Thermoplastic Vibrating Line Marking Paint Manufacturer Vibrating thermoplastic road marking paint consists of thermoplastic resin, modified rubber, fillers, and special materials and other substances. It is developed on the basis of pursuing high visibility and vibration. It is widely applied to the centre lines of roads (overtaking-prohibited lines), edge lines of highway, crossing slowdown lines and so on. Rainy night reflections: excellent visibility ...

Specification of this Truck Mounted Double Cylinder Double Pump Cold Paint Road Marking Machine Manufacturer   Specification It is designed for large-scale road,especially apply to city road,airport and express way etc. It can mark actual line,dotted line,double yellow line etc. It is equipped with double spray gun and double paint bucket,also can add additional manual spray gun, to make it mark lines in different color at the same time. Maximum flow 18L×2 Maximum work pressure 3...

Specification of this Thermoplastic Road Making Paint Manufacturer Test item Technical requirements Test value Conclusion Density(g/cm³） 1.8~2.3 1.99 Qualified softening point 90~125 104 Qualified drying time ≤3 3 Qualified film appearance No wrinkle,spot,blister,crack,off,Glued tyres ,the colour of fill appearance should be closed to standard Meet the requirement Quali...