—— Products Center ——
Products
Quick Fact
If you have any comments or suggestions, please click the button below to find the message board and leave a message for us
Factory Supply Removal Of Line Marking - LXD90-3B High Pressure Water Blasting Road Marking Removal With Suction System – Luxinda
Update time:Jan-08-2016
3 Levels of Thermo to ft your budget
Advantage one:imported suction system
LXD90-3B high pressure water blasting road marking removal adopt suction system imported form Germany,equipped with Jestream type high pressure pump imported form America.
It can remove road marking without damaging the road surface, and the waste water and residue can be suctioned into waste water tank, The waste water tank can accommodate about 700kg waste water(other capacity on request). New designed vehicle,equipped with more nozzle,can be jetting form different angles, to clean up road marking without damaging the road surface.
Advantage two:Automatic separation system
Residual and waste water can be suctioned into vacuum chamber,
what’s more,the residue can be separated from the waste water automatically,residue can be placed into plastic woven bag, which can be putted in the nearby Dustbin .
The waste water will be flowed into waste water tank,when the waste water tank are full, just discharge them into sewer through water pipe. Very convenient ,very safety, and very friendly to the environment!
Even in the city road,there’s no need to block the road.
Advantage three:uninterrupted efficient operation
The machine can work continuously,its work efficiency can over about 8m/min to 10m/min,
working and recycling can be done at the same time, no need to stop the machine.
Really meet the requirement of high efficient and environment protection.
Diesel engine | DEUTZ |
Power | 120KW |
High pressure Pump | America Jestream PumpPressure:140mpa
,Flow:35L/minbearing:Japan NSK,Plunger:hard alloy Φ20;High pressure seal:imported seal |
Remove speed | 8-10m/min |
Remove width | 150-250mm |
Suction system | German TechnologyOpen-type non-pressure tank
,can remove solid waste under construction |
Suction pressure | -0.4 |
booster pump | Max. 6KG |
water supply pipe | stainless steel and Withhold hose |
Water supply protection system | With Low pressure protection device for water supply |
Filter | Double layer stainless steel vertical type Filter |
Computer monitor instrument box | Total Computer monitor |
Fresh water/waste water tank capacity | 6000KG/700KG(capacity can be customized) |
Machine size | 5×2.2×2.3m |
Machine weight(empty weight) | 5000KG |
Previous page:
Related Suggestion
High definition Machine For Thermoplastic Road Marking - LXD-18L High Pressure Airless Cold Paint Spray Road Marking Machine – Luxinda
High definition Machine For Thermoplastic Road ...
Manufacturer of Road Line Marking Machines - LXD500 Hydraulic Double Cylinder Thermoplastic Preheater (Underground Parking) – Luxinda
Manufacturer of Road Line Marking Machines - L...
PriceList for Self Propelled Hot Melt Road Marking Machine - LXD-II High Pressure Road Surface Blowing And Sweeping All-in-one Machine – Luxinda
PriceList for Self Propelled Hot Melt Road Mark...
Good Quality Line Paint Removal - LXD D-390 Thermoplastic Road Marking Removal – Luxinda
Good Quality Line Paint Removal - LXD D-390 Th...
Professional China Road Marking Machine For Sale In Durban - Two Component Road Marking Machine For Flat Line, Profile Line And Agglomerate Line – Luxinda
Professional China Road Marking Machine For Sal...
Rapid Delivery for Road Striping Equipment - Two Component Road Marking Machine For Flat Line, Profile Line And Agglomerate Line – Luxinda
Rapid Delivery for Road Striping Equipment - T...