—— NEWS CENTER ——

Will the road marking paint remover have too much impact and damage the ground?

Time:10-27-2020

Abstract: Therefore, when the road marking paint removal machine is milling and cutting chips, the number of points contacting the working surface is small, and the impact force of the rotor is very large. The milling machine mills not only the float and some aggregates, but also some bones. Material vibration loosened the overall structure.


If the impact force of the road marking paint remover is too large, the low-rise structure of the structure will be damaged, and the project will leave hidden dangers. In addition, when chiseling between large cement concrete pavements, use a large milling machine or shot blasting machine for chiseling. Because the milling cutter head of the milling machine is rigidly connected with the milling rotor, the milling rotor is very heavy, and the density of the cutter head is relatively small, so when milling and cutting chips, the number of points that contact the working surface is small, and the impact force of the rotor It is very large. The milling machine not only removes the floating slurry and some of the aggregate, but also loosens some of the aggregate to affect the overall structure.


1. The main function of the milling machine is to mill the old asphalt concrete pavement). Another example is the shot blasting machine, where the impact force is not too large when the steel shot is roughened, and the working surface is flat after the construction, but the chiseling depth is shallow, and the uneven surface is not obvious, so the adhesion between the new and old cement concrete is It's worse. In addition, we can also see all kinds of chiseling equipment produced and supplied by some foreign surface treatment road marking removal equipment manufacturers according to different engineering requirements. Low vibration performance.

 

2. The higher the frequency of the road marking paint remover, the less the impact force. Therefore, it is more laborious and time-consuming to “gnaw” cement concrete as a “hard bone”, so some construction units mistakenly believe that the efficiency of the chisel is relatively low. It's a misunderstanding that you can't use more hands to hammer with a sledge hammer.