News
News
Which road marking machine works efficiently?
2020-10-27
If the amount of marking works is not large, such as redrawing some sections of the old line, you can use ordinary hand push or hand-held hot-melt marking machine. Because the small thermal marking machine is small in size, flexible in c...
Summary of the effect of removing filter materials on road markings
2020-10-27
The abrasion resistance of the magnetite filter material for marking removal is 20~35% higher than that of the ordinary magnetite filter material. You can refer to the successful experience in other places. Among them, the research on th...
Which is better for modern road marking cleaning technology?
2020-10-27
The filtering technology of modern marking cleaning machines is constantly being updated. Standard requirements such as 11127 and PSPC can easily cause mixed layers of filter materials and bedding materials during the backwashing process...
What should I pay attention to for the internal cleaning system of the marking machine?
2020-10-27
Road marking machines Some marking machines are equipped with an automatic cleaning system, which can quickly clean the pipeline system after each work is completed, so that it can save a lot of cleaning time.1. Glass bead system: Genera...
How to remove the marking line by shot blasting？
2020-10-27
Shot blasting method The shot blasting method uses shot blasting equipment to remove the markings. Its working principle is: the motor drives the impeller body to rotate, relying on the centrifugal force, the shot blasting machine throws...
Misunderstanding of hot melt model of marking machine
2020-10-27
Many customers who have not touched the hot-melt marking machine often have such a misunderstanding that they think that the hot-melt marking machine is the same as the cold spray at room temperature, as long as there is a hot-melt marki...
Frequently Asked Questions about Two-Component Marking Machine
2020-10-27
Road marking machines are necessary equipment for road traffic, and road markings must be maintained regularly to ensure the orderly progress of traffic. Today, traffic and everyone will answer the common questions about the road marking...
What is a thermoplastic road marking paint?
2020-10-27
The raw material is composed of thermosetting synthetic resin, extender pigments and fillers, plasticizers and other additives.Performance and use for marking the road surfaceThe paint is sprayed. www.youqi365.com will be evenly distribu...
Comparison of the difficulty of two-component marking and cold paint construction
2020-10-27
According to different construction methods, two-component marking paints can usually form four types of markings: spraying, scraping, oscillating and structural markings. The spraying type is the most used cold paint.Cold paint has the ...