—— NEWS CENTER ——

How to use the hand-push high-speed hot melt marking machine?

Time:10-27-2020

The line marking machine is a road construction machine that is widely used in roads, parking lots, railways, highways, bridges, tunnels, coal mines, buildings and other squares and runways to draw different restrictions, guidelines and warnings on flat ground.


1. Equipment composition

Basic equipment: hot melt kettle marking machine

Auxiliary equipment: zebra crossing machineold line removal machinehair dryercleaning machine, etc.


2. The hand-push hot-melt marking machine can draw a marking with a width of: (50mm/100mm/150mm/200mm/300mm/400mm/45mm) at one time, and the standard configuration is based on how many centimeters the width of your project needs to be marked. Centimeter crossed bucket. The old line cleaner CK1050 removes the old road markings. The sweeper is used to remove cold paint markings/pavement floating soil/cement residues, etc., and the hair dryer removes road dust and impurities, and prepares for construction.


3. Structure of marking machine:

(1). Paint bucket: double-layer stainless steel heat preservation and heating bucket, 100kg plug-in manual stirring device, detachable device.


(2). Glass beads storage box: 10kg/box


(3). Adjustable micro-bead spreader: synchronous clutch spreading is equipped with a speed-regulating and gear-shifting device, adjustable width 50-200mm


(4). Scribing bucket: made of high-precision ultra-thin cast iron, scraper structure, standard configuration 150mm


(5). Floor knife: hard alloy, equipped with eccentric sleeve device, can adjust the thickness of the marking range: 1-2.5mm


(6). Rubber wheel: aluminum alloy wheel stock, special heat-resistant rubber, the rear tail wheel is equipped with a positioner to ensure that the car body walks straight or turns freely.


(7). Marking width: 150mm marking bucket is standard, and there are different specifications such as 50/100/150/200/250/300/400/450mm. Different specifications of marking bucket and glass bead spreader can be replaced according to engineering requirements.


(8). Fire road: The front fire road and the back fire road are designed with seamless steel pipes, which is not easy to leak


(9). Size: 1250mm×900mm×950mm


(10). Weight: 110kg


Heating method: liquefied petroleum gas, carrying liquefied gas tanks; respectively supplying the paint bucket, the front and rear nozzles of the marking bucket, and the three adjusting valves respectively control the firepower.


4. After-sales service commitment:


(1). Service tenet: fast, decisive, accurate, thoughtful and thorough.


(2). Service goal: service quality wins customer satisfaction.


(3). Service efficiency: the hand-push high-speed hot-melt marking machine fails during or outside the warranty period, and the company has professional 24-hour after-sales service.