—— Products Center ——
Products
Quick Fact
If you have any comments or suggestions, please click the button below to find the message board and leave a message for us
LXD260C Automatic Truck Mounted Ultrahigh Pressure Water Jetting Paint/Rubber Removal
Update time:Oct-27-2020
3 Levels of Thermo to ft your budget

Standard data parameters list
General key component
(1) Front bracket module(1)
(2) Luxinda customized spray disc(3)
(3) Luxinda special nozzle(2)
(4)Truck required, For example: Jac truck,K5L cab,Engine:Yuchai ,YC4S160-50,Gearbox:fast-gear, 6DS60T,front axle: 3.5T, rear axle: 8T, crossbeam:230*75*6,tire: 10R22.5, vacuum tire。carriage dimension: 6800*2450*600,gross mass: 16T,load capacity: 9.8T
(5) Installation and truck upgrade
(6) drive unit for moving(reduction gear)
(7) Installation and separation of fresh and waste water
(8) Computerized speed/pressure synchronization
(9) Starter kits wear out parts/tools
Alternatives*
(1) omnirange
(2) monitoring system
(3) Handover, maintenance and operation training
(4) 250h Spare parts package (theoretically)
Road application
(5) Improvements in asphalt and concrete
(6) Clear road markings (hot melt, cold paint, two-component)
(7) Remove the oil stain on the road surface
(8) Remove Zebra crossing
Application at the airport
o Remove rubber and paint
o Oil cleaning
o AGL(Aerodrome Ground Lighting) cleaning
o The platform cleaning
Technical parameters
Max. pressure: 2800Bar (40Kpsi);
Working pressure: 2500Bar (36Kpsi)
Max. Flow: 39L/MIN; Pump can be changed when used to remove airport rubber (optional)
Ultrahigh pressure pump: import pump domestic assembly
Pump speed: 1500-2000 cycles per minute
Driving mode: direct drive
Diesel engine power: 225kw
Booster pump: the maximum 6KG booster pump
Filter: double stainless steel vertical filter two – stage filtration
Suction system:SSA vacuum pump,pressure: -0.4bar
Water tank:waste water tank:700kg(customizable),fresh water tank:6000kg(customizable)
Maximum elongation:1.3m
Total weight: 7000KG;
Machine size : 10m×2.5m×3.54m;
Apperance:Yellow(customizable)


ultrahigh pressure water jetting system, installed on the truck











Related Suggestion
LXD-860 Hand pushed square box hot melt road marking machine
LXD-860 Hand pushed square box hot melt road ma...
LXD Boost Vehicle (ride-on system)
LXD Boost Vehicle (ride-on system)
LXD400 Hydraulic Single Cylinder Thermoplastic Preheater
LXD400 Hydraulic Single Cylinder Thermoplastic ...
LXD1200JT / 1200JB Energy-saving Type Hydraulic Double Cylinder Thermoplastic Preheater
LXD1200JT / 1200JB Energy-saving Type Hydraulic...
LXD1200T / 1200B Hydraulic Double Cylinder Thermoplastic Preheater( Fuel:Diesel or LPG)
LXD1200T / 1200B Hydraulic Double Cylinder Ther...
LXD860 Ride On Type Thermoplastic Road Marking Machine
LXD860 Ride On Type Thermoplastic Road Marking ...