The high-pressure water removal technology not only has good removal effect, but also causes minimal damage to the road surface. At the same time, traditional road marking removal processes are prone to generating dust, and dust reduction measures need to be taken during the road marking removal process. High pressure water road marking removal technology solves the problem of dust, allowing for the simultaneous removal and suction of waste water and residue. In addition, high-pressure water removal technology reduces processes such as cleaning, dust reduction, and asphalt oil coating, improves construction efficiency, and reduces road occupation construction time.
Optioal one:1600kg(pressure)&36L(flow) type
Road Marking Paint Removal
0102030405
LXD high pressure water jetting road marking removal machine with waste suction system (two model available)
Product Introduction
Technical specification
|
Diesel engine |
Weifang Huadong Six Cylinder National II Engine |
|
Power |
173kw,Speed: 1800r/min |
|
Pump speed |
530r/min |
|
Pressure |
160mpa |
|
Flow rate |
36L/min |
|
Diameter of plunger |
20mm (plunger material is ceramic) Piston stroke: 85mm (plunger material is ceramic) |
|
High pressure seal |
imported molded seal |
|
|
Water slag separation, water drainage, and solid slag are hydraulic self dumping functions. The forced lubrication system and oil cooling system are equipped with imported safety blasting diaphragm high-pressure gauges and fully computerized monitoring instrument boxes |
|
Boosting pump |
Pre booster pump with a maximum boost of 6kg |
|
Water supply pipeline system |
stainless steel and pressure hose |
|
Filter |
Double layer stainless steel vertical filter, secondary filtration |
|
Water supply protection system |
including low pressure protection system for water supply |
|
Waste suction system: |
SSA vacuum pump, pressure -0.4bar |
|
Water tank |
Clear water tank 2.5T, sewage tank 3T (customizable) |
|
Size |
4.1m * 2m * 2m (customizable) |
|
Self weight |
about 5T |
Optioal two:2000kg(pressure)&48L(flow) type
Technical specification
|
Diesel engine |
Weichai four cylinder National III emission |
|
Power |
154kw,Speed: 2200r/min |
|
Pump speed |
370r/min |
|
Pressure |
200mpa |
|
Flow rate |
48L/min |
|
Bearing |
NSK Japan |
|
Piston |
Hard alloy 19.05 |
|
High pressure seal |
imported molded seal |
|
|
Water slag separation, water drainage, and solid slag are hydraulic self dumping functions. The forced lubrication system and oil cooling system are equipped with imported safety blasting diaphragm high-pressure gauges and fully computerized monitoring instrument boxes |
|
Boosting pump |
Pre booster pump with a maximum boost of 6kg |
|
Water supply pipeline system |
stainless steel and pressure hose |
|
Filter |
Double layer stainless steel vertical filter, secondary filtration |
|
Water supply protection system |
including low pressure protection system for water supply |
|
Waste suction system: |
SSA vacuum pump, pressure -0.4bar |
|
Water tank |
Clear water tank 2.5T, sewage tank 3T (customizable) |
|
Size |
4.1m * 2m * 2m (customizable) |
|
Self weight |
about 5T |
Our Pictures of this Driving Type Thermoplastic(convex) Road Marking Machine Factory
