Two Component Road Marking Machine
0102030405
LXD-618 Driving type road marking machine for cold plastic-spotline
Product Introduction
The 618 ride on marking machine is a practical and multifunctional machine that uses a turbine The standard mechanical marking equipment for roller turning. The device itself can be adjusted according to The user's needs can be met by replacing components such as the system and paint cylinder to achieve hot melt Extrusion coating, melting point coating, hot melt oscillation, two component shaking and scraping, two-component Multi functional marking techniques such as dot coating and cold spraying.
Technical specification
|
Engine |
Kubota 1505 type diesel engine |
|
Fuel |
Diesel oil |
|
Electrical system |
LXD electronic control system |
|
Steering |
Powerful standard mechanical steering system according to the requirements mentioned |
|
Drive / brake system |
Hydrostatic transmission, also used as service brake, parking brake hydraulically controlled multi-disc brake |
|
Wheels |
6.00-9NHS * 4 |
|
Compressor |
0.21m³ / min |
|
Operating air pressure |
7 bar, silenced safety valve |
|
Paint pressure tank |
385 ltr., with agitator, other container capacities on request |
|
Mixing-system |
98 : 2 |
|
Marker unit |
screed box for solid line |
|
Glass bead equipment |
on request, metering bead dispenser up to 300 mm |
|
weight |
About 1600kg |
|
Dimensions |
About length 4m（not include pointer）* width 1.4（not include shoe） m* height 2.2 m（adjustable） |
Our Pictures of this Driving Type Thermoplastic(convex) Road Marking Machine Factory
