Thermoplastic Road Marking Machine
0102030405
LXD-350 Self Propelled thermoplastic spray type road marking machine
Product Introduction
Self-propelled hot melt spraying machine adopts the principle of centrifugal roller spraying, through the high-speed rotation of the biaxial gear, the centrifugal force will spray the paint to the road surface to form the coating film. Spray spraying, linear smooth, neat edge, uniform thickness, good adhesion effect of micro glass beads. With the rapid development of traffic, most of the high grade pavement adopts the coarse gravel seepage pavement. The road surface is repaired by dilute sealing process. It brings a new subject to our road marking quantity. Adopting the new technology of hot melt spraying, not only the material is saved, but also the mesh drainage is good and the reflection is good.
Technical parameters
|
Model |
LXD-350 |
|
Engine |
5.5HP Honda engine |
|
Drive device |
continuously variable speed |
|
maximum climbing Angle |
18° |
|
Paint tank capacity |
100kg |
|
line width |
15cm,20cm,30cm,40cm,45cm available,standard configuration:15cm |
|
Thickness adjustment |
1.2—2.5mm |
|
Length X Width X Height |
130x93x100cm |
Product features
1. Import continuously variable speed drive device is selected, forward, backward, stop, control freely.
2. Spraying hopper does not touch the road surface, especially suitable for gravel and other rough road surface, linear smooth, neat edges, high construction efficiency.
3. Spraying hopper does not touch the road surface, especially suitable for gravel and other rough road surface, linear smooth, neat edges, high construction efficiency.
4. Spraying hopper does not touch the road surface, especially suitable for gravel and other rough road surface, linear smooth, neat edges, high construction efficiency.
Pictures of this China Driving Type Thermoplastic(convex) Road Marking Machine
Our Pictures of this Driving Type Thermoplastic(convex) Road Marking Machine Factory
