Thermoplastic Road Marking Machine
0102030405
LXD-168 driving type thermoplastic screeding (convex) type road marking machine
Product Introduction
The LXD-168 driving type hot melt road marking machine is a practical and multifunctional marking equipment. The equipment itself has a high degree of automation, a high safety factor, reduces the labor intensity of operators, and improves the efficiency of marking construction.
Technical specification
| Engine power | Honda GX390 (liquefied gas), power 13HP |
| Heating method | liquefied gas heating; Diesel heating (25kg liquefied gas tank, self provided) |
| Vehicle control system | CPU computer board imported from Germany Siemens control system |
| Working mode | Dual mode (flat line or convex line) |
| Walking drive system | liquefied gas power, hydraulic drive, continuously variable transmission |
| Air compressor | imported air compressor, air pump, displacement air pump pressure 0.4-0.6KG |
| Work pressure | 0.4kg |
| Paint bucket capacity | inner diameter 580, height 520, volume 137.3L, approximately equal to 0.14 cubic meters |
| Glass bead box capacity | 25KG |
| Working speed | 0-20km/h |
| Maximum climbing gradient | 30 ° |
| Height of raised marking | 0-10mm |
| Marking width | 5.10.15.20.30.45cm (bucket width can be adjusted according to engineering requirements) |
| Wheels | 2 front wheels and 2 rear wheels, made of inflatable rubber material, 15 × 6.00-6NHS |
| Lights | LED headlights, warning lights, turn signals, control panel display lights |
| Body length, width, and height | 3 × 1.5 × 1.65m |
| Pointer length | 2m (extendable) |
| Weight | 980KG |
Our Pictures of this Driving Type Thermoplastic(convex) Road Marking Machine Factory
